Accessories címkéhez tartozó bejegyzések

Probes

Szonda

 

Probes are immersed into conductive liquids, and sense the the it’s conductivity. With probes, we can regulate water level. We can connect it to electronic probes, water level indicators.

With cable gland, the probe provide a waterproof electronic connection.

MacNivel

MacNivel

MacNivel

Application: This product allows to view the water level present in a storage tank.

Advantages: Based on the principle of the probes, The device, powered by a battery, applies a voltage across the wires inserted in the terminal block. These wires are positioned into the tank.

Benefits: Easy to install on the wall thanks to the support provided. The LED bar allows a simple and intuitive reading of the water reserve.

Power supply 9 V Battery
Operation temperature 0°C ÷ + 50°C
Storage temperature -20°C ÷ + 80°C
Dimensions 106x80x30 mm
Weight 70 g
Container ABS

Sentinel 2

Sentinel-2

 

Application: Connected to a level controller, allows acoustic signals according to thelevel of the liquid.

sentinel-in

Advantages: The product is equipped with an output relay with free contacts, to activate an alarm signal at a distance. The relay works only when the device is powered on the network.

Benefits: When the level regulator closes the switch, Sentinel 2 activates its internal buzzer and activate any alarm connected to the relay

Power supply 230 V~
Back up battery  9 V – 110 mA (Ni-Cd)
Chars. Output Relay 0,5A a 250 V~
Current at command 13 mA max
Consumption 1 VA
Charging current 13 mA
Holding current 3 mA
Internal buzzer
Operation temperature 0 °C ÷ 50 °C
Storage temperature 0 °C ÷ 60 °C
Dimensions 105x55x46(64) mm
Weight 160 g
Container ABS
On request, we can provide the product with other voltage

Teflon tape

Teflonszalag-vizre

 

Teflon tape is a professional sealing equipment for plumbing system. The benefits are the more effective sealing as hemp, and waste doesn’t arise when working with it. The tape with blue case is for water, and the tape with yellow case is for gas.

The size of teflon tape: 12 mm x 0.75 mm
The lenght of teflon tape: 12 m

Filters ACL

EMI-szuro

 

When the cable connection between the pump and variable frequency driver (common in submersible pumps) exceed 10 m, capacitive effect can be occur. This effect can damage the pump, and affect it’s work. We recommend ACL filters to eliminate these effects.

Filters are available for single- phase and three-phase pumps with different currents.

Mounting position: any
Protection ratiing: IP20
Operating temperature: 0 °C ÷ 50 °C
Material: Galvanized steel

ACLM/900600010
Pump voltage: 1 x 230V~
Current: 10A
No cooling fan
Dimensions: 24x14x16 cm
Weight: 4,5 kg


ACLM/900600011
Pump voltage: 1 x 230V~
Current: 10A
Cooling fan
Dimensions: 24x14x16 cm
Weight: 4,6 kg


ACLT/900600005
Pump voltage: 3 x 400/230V~
Current: 10A
No cooling fan
Dimensions: 24x14x16 cm
Weight: 5 kg


ACLT/900600006
Pump voltage: 3 x 400/230V~
Current: 10A
Cooling fan
Dimensions: 24x14x16 cm
Weight: 5,1 kg


ACLT/900600013
Pump voltage: 3 x 400/230V~
Current: 16A
No ooling fan
Dimensions: 24×14,5×18,5 cm
Weight: 8,5 kg

Copper alloy reducer

copper-alloy-reducer-kompel

 

Copper alloy reducer helps connect pipes with different diameters with threaded end. There is no need to solder or weld together the pipes. The reducer is easily installable and removeable, and can be installed quickly. With it’s usage, there is no residue or waste.

You can select from the listed products here

Copper alloy reducer
1″ M – 3/4 ” F


Galvanized steel reducer
1″ M – 3/4 ” F


 

Copper alloy fittings

copper-alloy-fittings-kompel

 

Copper alloy fittings (3 and 5 ways) for installing pressure switches, pressure tanks, expansion vessels, pumps.

You can select from the listed products here

RCM/F (elbow)
1″ F x 1″ M
lenght: 72 mm


RC3 (3 ways)
1″ F x 1″ F x 1″ M
lenght: 72 mm


RCC (5 ways)
1″ F x 1″ F x 1″ M x 1/4″ F x 1/4″ M
lenght: 72 mm


RCL (5 ways)
1″ F x 1″ F x 1″ M x 1/4″ F x 1/4″ M
lenght: 82 mm


RCLL (5 ways)
1″ F x 1″ F x 1″ M x 1/4″ F x 1/4″ M
lenght: 91 mm


 

Electromagnetic interference filter / EMI filter

ACL-filter

An electrical supply cable between an asynchronous motor (pump motor) and a VFD creates capacitive effect, when the cable is longer than 10 meter (often occur in submersible pumps). That effect can ruin the windings of the motor, and occur malfunctions. With an EMI filter, the cable can be goes up to 80 meter. The filter must be installed between the motor and the VFD.

ACL-filter-installation-draw

Mounting position Any
Protection rating IP 20
Operational temperature 0 °C – 50 °C
Approval CE
Material Galvanized steel
Product Power supply Current consumption Cooling
ACLM \900600010 1 x 220 V~ 10 A  
ACLM \900600011 1 x 220 V~ 10 A x
ACLT \900600005 3 x 400 / 220 V~ 10 A  
ACLT \900600006 3 x 400 / 220 V~ 10 A x
ACLT \900600013 3 x 400 / 220 V~ 16 A