Application: Particularly suitable when there is not enough space for the movement of a traditional floating

Advantages: For its operation uses a capacitive sensor, integrated in the plastic structure, that makes it suitable for a wide range of liquids. It can be operated by battery or electricity and thanks to an internal relay 10 (4) it is able to control pumps with up to 700 W.

Benefits: It can be easily installed nearby of the pump through the two holes in the structure. The models with 12V or 24V power supply with delay ON/OFF, are particularly suitable for marine use.

The post Capacitive electronic sensor / REKA appeared first on Szivattyúvezérlés.

The DB Electroprobe is intended for use in the sector of level control instruments, opens up a whole new field of multifunctional equipment.

Application: in the field of level control instruments, it is a multifunctional device.
Advantages: an extremely innovative product which unites a series of
functions in a very small space (4 DIN modules):
– ON-OFF electroprobe (operating in one single point): acts on relay 2 using probes
6 and 12.
– Differential electroprobe (operates between two probes positioned by installer): acts
on relay 1 using probes 10 and 11, always together with 6 and/or 7 as common.
– High alarm: use probes 9 and 6.
– Low alarm: use probes 8 and 7.
– Internal Buzzer: For high and low alarms.
– Control for external alarm (buzzer or light).
Benefits: Possibility of activating or deactivating controls by means of dipswitch. The
installation of 4 electroprobes would be necessary to obtain the same functions.

Power supply 24 V~ – 117 V~ 230 V~ 50 ÷ 60 Hz
Inter electrode voltages 24 V~
Consumption Max 10 VA
Operating resistance 0 – 20 KΩ
Relase resistance  > 20 KΩ
Mounting on DIN rail
Contact rating 5(2)A 250V
Contact rating alarm relay AC1 0,5A 250 V ~ resistive
Response time 100 ms
Operating temperature – 10°C ÷ + 50 °C
Storage temperature – 20°C ÷ + 80 °C
Housing box Noryl (PPO) UL 94 V0
Protection rating IP20
Approval CE
Dimensions 90x72x60 mm
Weight 320 gr.
Max cable leght of probes 20 meter

The post Multifunctional electroprobe – DB appeared first on Szivattyúvezérlés.

Application: Level controller by DIN rail mounting.

Advantages: The EV type guarantee the SR type flexibility, the NS type performance
and , moreover, it also allows to:
– set the relay start time delay 0÷16s
– select the filling or emptying function.
– request a relay output with 2 change over contacts in 3 DIN rail version.

Benefits: High tech device with micro controller, beside adjustable sensitivity, permits
to set a relay start delay and has multivoltage power supply version.

Operation principle: sense the condutcion of the liquids with the probes. The deepest probe is the common, the two are the max and min. level switcher. The length of the cable of the probe can be 1000 m. When the 3 probes sink into the liquid, an inner relay activates within the Q2 EV. With the decrease of the liquid level, the device will close the relay.

Power supply  24 – 117 – 230 – 380-415 V~ 50 ÷ 60 Hz
Inter electrode voltages 10 V~
Consumption  Max 4 VA
Operating resistance 0 ÷ 100 KΩ
Relase resistance  > 20 KΩ
Mounting on DIN rail
Contact rating  250V 5(2)A
Dielectric strenght 2000 V
Response time 100 ms
Adjustable start time delay 0 – 16 sec
Operating temperature – 10°C ÷ + 50 °C
Storage temperature – 20°C ÷ + 80 °C
Housing box Noryl (PPO) UL 94 V0
Protection rating IP20
Approval CE
Dimensions 90x54x59 mm
Weight 200 gr.
Max cable leght of probes 1000 meter

The post Adjustable level regulator – EV appeared first on Szivattyúvezérlés.

Q-SR probe level regulators are for liquids with different conductive (from 1 to 100 kΩ). Perfect solution for various industrial liquids (for example.: vine, liquid soap, milk, soda).

Application: Level controller by DIN rail mounting.

Advantages: a wide range for each need.

Models SR [ adjustable sensitivity]
For the control of conductive liquids with unknown conductivity this model is essential
which controls up to 100 Kohm.

Benefits: easy to install and the experience of Mac3 ensures ideal operation for use in
water systems.

Power supply  24 – 117 – 230 – 380-415 V~ 50 ÷ 60 Hz
Inter electrode voltages 10 V~
Consumption Max 4 VA
Operating resistance 0÷100KΩ
Mounting on DIN rail
Contact rating 5(2)A 250V
Dielectric strenght 2000 V
Operating temperature – 10°C ÷ + 50 °C
Storage temperature – 20°C ÷ + 80 °C
Housing box Noryl (PPO) UL 94 V0
Protection rating IP20
Approval CE
Dimensions 90x54x59 mm
Weight 200 gr.
Max cable leght of probes 70 ÷80 meter

The post Electroprobe for differend conductivity liquids – Elettrosonda Q appeared first on Szivattyúvezérlés.

Application: Sensopress is a high technology gauge and electronic level regulator that can be used in sandy drinking water, in liquid foodstuffs or, with the use of proper system solutions, in dirty water or corrosive liquids.
Advantages: Measurement is made by a very sensitive pressure sensor, whose signal, which is transformed and processed by a microcontroller, is converted into “water column height”, measured in centimeters.
Benefits: user friendly by a LCD display, on which all the information, relative to the device, is visualized, as well as three function keys for interaction and parameter modification.

The post Hi-tech electronic level controller – SENSOPRESS appeared first on Szivattyúvezérlés.