The self-priming JSW pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure sets, and for the irrigation of gardens and allotments, etc.
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Pumped liquid: clean water
Use: domestic, civil
Type: surface
Range: self-priming

Performance range
Flow rate up to 80 l/min (4.8 m³/h)
Head up to 70 m

Application limits
Manometric suction lift up to 9 m (HS)
Liquid temperature between -10 °C fino and +40 °C
Ambient temperature up to +40°C
Max. working pressure 6.5 bar
Continuous service S1

Technical data sheet / performance data

The post Self-priming “JET” pumps | Pedrollo JSWm 2 appeared first on Szivattyúvezérlés.

ZX series pumps are suitable for draining waste water in domestic applications and for pumping dirty water containing suspended solids up to Ø 40 mm.
They distinguish themselves for the ease with which they are installed and their reliability under automatic operating conditions in fixed installations.

Pumped liquid: drainage dark water
Use: domestic
Type: submersible
Range: vortex

Performance range
Flow rate up to 400 l/min (24 m³/h)
Head up to 11 m

Application limits
5 m maximum immersion depth
Maximum liquid temperature +40°C
Passage of suspended solids up to Ø 40 mm
Suction down to 50 mm above ground level
240 mm minimum immersion depth for continuous service

Technical data sheet / performance data

The post „VORTEX” Submersible pumps for very dirty water | Pedrollo ZX appeared first on Szivattyúvezérlés.

The TOP-GM series is suitable for use with clear water that does not contain abrasive particles and comes complete with a vertical float switch meaning that the pumps can be used in particularly small spaces.
As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable.
They are suitable for use in applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps.

Pumped liquid: drainage clear water
Use: domestic
Type: submersible
Range: centrifugal

Performance range
Flow rate up to 260 l/min (15.6 m³/h)
Head up to 10.5 m

Application limits
3 m maximum immersion depth
Maximum liquid temperature +40 °C (Maximum liquid temperature +90 °C for a maximum of 3 minutes intermittent service)
Passage of suspended solids up to Ø 10 mm
Suction down to 14 mm above ground level
Continuous service S1

Technical data sheet / performance data

The post Submersible DRAINAGE pumps for clear water | Pedrollo TOP2 appeared first on Szivattyúvezérlés.

The hydraulic characteristics of these pumps, coupled with their compactness, makes them suitable for use in both domestic and industrial applications.
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Pumped liquid: clean water
Use: industrial
Type: surface
Range: peripherals

Performance range
Flow rate up to 90 l/min (5.4 m³/h)
Head up to 100 m

Application limits
Manometric suction lift up to 8 m
Liquid temperature between -10 °C and +90 °C
Ambient temperature between -10 °C and +40 °C (+45 °C for PQ 60, PQ 60-Bs)
Max. working pressure:
– 6.5 bar for PQ 60-65
– 10 bar for PQ 70-80-81-90-100-200-300
Continuous service S1

Technical data sheet / performance data

The post Pumps with peripheral impeller | Pedrollo PQ appeared first on Szivattyúvezérlés.

Ready to install, stainless steel monoblock submersible pump.
Complete with:
– motor with built-in capacitor and thermal overload protector
– 20 m long power cable.
Suitable for pumping clean water from boreholes that contain sand (up to 150 g/m³).
As a result of their high efficiency and reliability they are suitable for use in domestic applications such as domestic water supply as part of a pressure supply and for irrigation, etc.

Pumped liquid: clean water with sand max 150 g/m³
Use: domestic, civil, agricultural
Type: submerged
Range: monoblock for 4″ wells

Performance range
Flow rate up to 150 l/min (9 m³/h)
Head up to 128 m

Application limits
Maximum liquid temperature +35 °C
Maximum sand content 150 g/m³
Maximum immersion depth of 60 m
Vertical and horizontal installation
Starts/hour: 20 at regular intervals
Continuous service S1

Technical data sheet / performance data

The post 4” monoblock submersible pump | Pedrollo 4BLOCK appeared first on Szivattyúvezérlés.

As a result of their high efficiency and reliability they are suitable for use in applications such as domestic water supply from reservoirs, tanks or relatively deep wells, for drawing rain water from cisterns to water gardens or for use in irrigation systems, etc.
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.

Pumped liquid: clean water
Use: domestic, civil
Type: submersible
Range: multi-impeller

Performance range
Flow rate up to 120 l/min (7.2 m³/h)
Head up to 42 m

Application limits
10 m maximum immersion depth
Maximum liquid temperature +40 °C
Passage of suspended solids up to Ø 1.3 mm
Suction down to 22 mm above ground level
Continuous service S1

Technical data sheet / performance data

The post Submersible multi-impeller pumps | Pedrollo TOP MULTI 2 appeared first on Szivattyúvezérlés.

The self-priming JCR pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure sets, and for the irrigation of gardens and allotments, etc.
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Pumped liquid: clean water
Use: domestic
Type: surface
Range: self-priming

Performance range
Flow rate up to 80 l/min (4.8 m³/h)
Head up to 72 m

Application limits
Manometric suction lift up to 9 m (HS)
Liquid temperature between -10 °C and +40 °C
Ambient temperature up to +40 °C
Max. working pressure 6.5 bar
Continuous service S1

Technical data sheet / performance data

The post Self-priming “JET” pumps |Pedrollo JCRm appeared first on Szivattyúvezérlés.

Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Pumped liquid: clean water
Use: domestic
Type: surface
Range: peripherals

Performance range
Flow rate up to 90 l/min (5.4 m³/h)
Head up to 100 m

Application limits
Manometric suction lift up to 8 m
Liquid temperature between -10 °C and +60 °C
Ambient temperature up to +40 °C (+45 °C for PK 60)
Max. working pressure:
– 6.5 bar for PK 60-65-70-80
– 10 bar for PK 90-100-200-300
Continuous service S1

Technical data sheet / performance data

The post Pumps with peripheral impeller |Pedrollo PK appeared first on Szivattyúvezérlés.

Pumped liquid: clean water
Use: domestic, civil
Type: surface
Range: self-priming

Performance range
Flow rate up to 130 l/min (7.8 m³/h)
Head up to 50 m

Application limits
Manometric suction lift up to 9 m (HS)
Liquid temperature between -10°C and +40°C
Ambient temperature up to +40°C
Max. working pressure 6 bar
Continuous service S1

Technical data sheet / performance data

The post Self-priming multi-stage pump | Pedrollo PLURIJET appeared first on Szivattyúvezérlés.

Performance range
Flow rate up to 130 l/min (7.8 m³/h)
Head up to 52 m

Application limits
Manometric suction lift up to 7 m
Liquid temperature between -10 °C and +40 °C
Ambient temperature up to +40 °C
Max. working pressure 6 bar
Continuous service S1

Technical data sheet / performance data

The post Multi-stage centrifugal pumps | Pedrollo CP appeared first on Szivattyúvezérlés.