Probes are immersed into conductive liquids, and sense the the it’s conductivity. With probes, we can regulate water level. We can connect it to electronic probes, water level indicators.

With cable gland, the probe provide a waterproof electronic connection.

The post Probes appeared first on Szivattyúvezérlés.

MacNivel

Application: This product allows to view the water level present in a storage tank.

Advantages: Based on the principle of the probes, The device, powered by a battery, applies a voltage across the wires inserted in the terminal block. These wires are positioned into the tank.

Benefits: Easy to install on the wall thanks to the support provided. The LED bar allows a simple and intuitive reading of the water reserve.

Power supply 9 V Battery
Operation temperature 0°C ÷ + 50°C
Storage temperature -20°C ÷ + 80°C
Dimensions 106x80x30 mm
Weight 70 g
Container ABS

The post MacNivel appeared first on Szivattyúvezérlés.

Application: Connected to a level controller, allows acoustic signals according to thelevel of the liquid.

Advantages: The product is equipped with an output relay with free contacts, to activate an alarm signal at a distance. The relay works only when the device is powered on the network.

Benefits: When the level regulator closes the switch, Sentinel 2 activates its internal buzzer and activate any alarm connected to the relay

Power supply 230 V~
Back up battery  9 V – 110 mA (Ni-Cd)
Chars. Output Relay 0,5A a 250 V~
Current at command 13 mA max
Consumption 1 VA
Charging current 13 mA
Holding current 3 mA
Internal buzzer
Operation temperature 0 °C ÷ 50 °C
Storage temperature 0 °C ÷ 60 °C
Dimensions 105x55x46(64) mm
Weight 160 g
Container ABS
On request, we can provide the product with other voltage

The post Sentinel 2 appeared first on Szivattyúvezérlés.

Teflon tape is a professional sealing equipment for plumbing system. The benefits are the more effective sealing as hemp, and waste doesn’t arise when working with it. The tape with blue case is for water, and the tape with yellow case is for gas.

The size of teflon tape: 12 mm x 0.75 mm
The lenght of teflon tape: 12 m

The post Teflon tape appeared first on Szivattyúvezérlés.

Manometer is a pressure gauge installed on the pipe, and measures the liquid’s pressure, and display it’s current value.

The liquid filled gauges can measure low viscosity, non crsytalize liquids and gases.

The gauges are not certified.

The post Pressure gauges appeared first on Szivattyúvezérlés.

When the cable connection between the pump and variable frequency driver (common in submersible pumps) exceed 10 m, capacitive effect can be occur. This effect can damage the pump, and affect it’s work. We recommend ACL filters to eliminate these effects.

Filters are available for single- phase and three-phase pumps with different currents.

Mounting position: any
Protection ratiing: IP20
Operating temperature: 0 °C ÷ 50 °C
Material: Galvanized steel

ACLM/900600010
Pump voltage: 1 x 230V~
Current: 10A
No cooling fan
Dimensions: 24x14x16 cm
Weight: 4,5 kg

ACLM/900600011
Pump voltage: 1 x 230V~
Current: 10A
Cooling fan
Dimensions: 24x14x16 cm
Weight: 4,6 kg

ACLT/900600005
Pump voltage: 3 x 400/230V~
Current: 10A
No cooling fan
Dimensions: 24x14x16 cm
Weight: 5 kg

ACLT/900600006
Pump voltage: 3 x 400/230V~
Current: 10A
Cooling fan
Dimensions: 24x14x16 cm
Weight: 5,1 kg

ACLT/900600013
Pump voltage: 3 x 400/230V~
Current: 16A
No ooling fan
Dimensions: 24×14,5×18,5 cm
Weight: 8,5 kg

The post Filters ACL appeared first on Szivattyúvezérlés.

Probe holder for 3 probes. Connections: d = 6 mm

The post Probe holder appeared first on Szivattyúvezérlés.

All MAC3 level regulators may be equipped with a piggy back plug. The
piggy back plug is connected to the power supply and receives the plug of the pump.
So that the pump power is controlled by the floating.

The post Piggy back plug | SPIN appeared first on Szivattyúvezérlés.

With counterweight, we can adjust manually the maximum and the minimum regularization level of the liquid contain the float switch. The distance between top of the float switch and the counterweight will be half as the distance between max and min level.

Counterweight sizes:
-standard: 200 gr
-orderable: 400 gr

The post Counterweight for float switch appeared first on Szivattyúvezérlés.